Tiếng Việt
日本語
Machine Tools
Cutting Tools
Clamping Tools
Measuring Equipment
Environmental Equipment
Automation Solutions
| Model | YMZ-850 | |
| Table | Table size | 950x950mm |
| T-slot dimensions | P80x18x5Tmm | |
| Distance from floor to top of table | 935mm | |
| Maximum loading capacity | 500kg | |
| Travel | X-axis travel | 800mm |
| Y-axis travel | 500mm | |
| Z-axis travel | 500mm | |
| Distance from spindle nose to table top | 125~625mm | |
| Distance from spindle center to column guide surface | 510mm | |
| Spindle | Spindle taper hole | Taper 7/24 No.40 |
| Spindle diameter | φ70mm | |
| Spindle speed | 12000rpm | |
| Feed | Axis drive | ローラーガイド |
| Ball screw diameter | φ70mm36mm | |
| Cutting feed rate | 10/10/10m/min | |
| Rapid traverse rate X/Y/Z | 36/36/24m/min | |
| ATC | Tool change time (TtoT) | 1.7 second |
| Maximum tool diameter (adjacent tools present) | φ76mm | |
| Maximum tool diameter (no adjacent tools) | φ125mm | |
| Maximum tool length | 300mm | |
| Maximum tool weight | 7kg | |
| Tool shank | BT40 | |
| Pull stud type | MAS-I 45* | |
| Tool selection method | Random Access Memory (RAM) | |
| Number of tool pockets | 24 | |
| Motor | Spindle motor (continuous / 15 min / 15% duty cycle) | 7.5/11/15kw |
| Feed axis motors (X/Y/Z) | 1.8/3Kw | |
| Coolant pump motor | 660w | |
| Tank capacity | Coolant tank capacity | 260L |
| Power requirements | Power supply | AC200V±10%, 50/60Hz±1Hz |
| Total power consumption | 24kVA (standard)
27kVA (Full option※１) |
|
| Pneumatic source | 0.6Mpa (6kgf/cm2) | |
| Machine dimensions | Required floor space + maximum height | 2568.5x2150x2700mm |
| Machine weight | 4500kg | |
※ 1: +7 kVA when selecting the high-power motor
Note: Specifications are subject to change. For details, please contact us via the inquiry page.
