Tiếng Việt
日本語
Machine Tools
Cutting Tools
Clamping Tools
Measuring Equipment
Environmental Equipment
Automation Solutions
| Model | Unit | MCR-C | MCR-BIII※9 | MCR-A5CII | |
| Travel | X-axis travel (table longitudinal) | mm | 4,200～12,200 | 3,000～12,000 | 3,200～12,200 |
|
Y-axis travel (spindle head cross) |
mm | 3,200～4,200 | 2,700～4,200 | 2,600～4,100 | |
| Z-axis travel (ram vertical) | mm | 1,050［1,250］ | 800［1,000］ | 800 | |
| W-axis travel (cross rail elevation) | mm | 1,000、1,200 | 700～1,300 | 800～1,200 | |
| Effective gate width (or effective gantry span) | mm | 2,650～3,650 | 2,050～3,550 | 2,150～3,650 | |
| Max. distance from table surface to spindle nose | mm | 1,650～1,850 ［1,550～1,750］ ※1 |
1,350～1,850 ［1,250～1,750］ ※1 |
1,450～1,850 ［1,350～1,750］ ※1 |
|
| Table | Table working surface size | mm | 2,000×4,000～3,000×12,000 | 1,500×2,800～3,000×11,800 | 1,500×3,000～3,000×12,000 |
| Max. table loading capacity | kg | 22,000～66,000 | 12,000～72,600 | 12,000～66,000 | |
| Table top configuration [T-slot width × number (pitch)] | mm | 24H7×11、13、15 （Center area 200） |
24H7×9～15 （Center area 200） |
24H7×11、13、15 （Center area 200） |
|
| Height from machine base to floor | mm | 850～950 | 800～950 | 850～950 | |
| Feedrate | Rapid traverse rate | m/min | X・Y：24、Z：15 （X・Y：24※2、Z：15）※3 （X：20、Y：24※2、Z：15）※4 |
X：15、Y：20※10、Z：15 | X：30、Y：32、Z：20 （X：30、Y：32※2、Z：20）※20 （X：20、Y：32※2、Z：20）※21 （X：30、Y：30※2、Z：20）※22 （X：20、Y：30※2、Z：20）※23 |
| Cutting feedrate | mm/min | 1～10,000 | 1～10,000 | 1～10,000 | |
| W-axis feedrate (cross rail elevation) | mm/min | 3.000 | 3.000 | 3.000 | |
|
ATC
|
Tool shank type | MAS BT50 | MAS BT50 | MAS BT50 | |
| Pull stud type | MAS 2 | MAS 2 | MAS 2 | ||
| Tool storage capacity | cái | 50 ［80、100、120、180］ |
32※11 ［50、72、100、120、180］ |
50 ［80、100、120、180］ |
|
| Max. tool diameter | mm | With adjacent tool：ø135 Without adjacent tool：ø264 |
With adjacent tool：ø135 Without adjacent tool：ø230 |
With adjacent tool：ø135 Without adjacent tool：ø230 |
|
| Max. tool length | mm | 600 | 400 | 400 | |
| Max. tool weight | kg | 25 | 25 | 25 | |
| Tool selection method | Absolute Addressing System | Absolute Addressing System | Absolute Addressing System | ||
| Spindle | Spindle speed | min-1 | 4,000［6,000］ | 4,000［3,600、6,000、8,000、10,000］ | 4,000［6,000、10,000］ |
| Spindle taper | 7/24テーパNo.50 | 7/24テーパNo.50 | 7/24テーパNo.50 | ||
| Spindle bearing inner diameter | mm | ø100［ø85※5、ø130※6、ø100※7］ | ø100［ø85※12］ | ø100［ø85※24］ | |
| Motors | Spindle motor | kW | 45/37（30 min/ continuous） ［37（continuous）］※5 |
30/22（30 min/ continuous）※8 ［45/37（30 min/ continuous）※13、22（continuous）※5、 26/22（30 min/ continuous）※14］ |
26/22（30 min/ continuous）※8 ［26/22（30 min/ continuous）※24、 30/22（30 min/ continuous）※25］ |
| Feed axis motor | kW | X：14.0、Y：9.4、Z：5.2×2 | X：9.4（14※15）、Y：7.3、Z：4.6×2 （X：9.4（14※16）、Y：9.4、Z：4.6×2）※17 |
X：9.4（14※26）、Y：7.3、Z：5.2×2］ | |
| Cross rail elevation motor | kW | W：4.6（5.2※18）×2 | W：4.6（5.2※18）×2 | W：4.6×2 | |
| Required Power Supply | Power supply | kVA | 60※8 | 60※8 | 60※8 |
| Air supply | L/min(ANR) | 650（0.5MPa or higher）※8 | 650（0.5MPa or higher）※8 | 650（0.5MPa or higher）※8 | |
| Machine Dimensions | Machine height | mm | 6,730、6,980 | 6,250～6,850 | 5,820～6,300 |
| Required floor space (machine only) | mm | 7,810×10,730～8,835×27,930 | 6,950×8,200～8,700×27,400 | 6,180×8,430～7,780×27,930 | |
| Machine weight (machine only) | kg | 48,000～116,000 | 36,000～120,900 | 32,000～101,000 | |
| CNC controller | OSP-P300MA | OSP-P300MA | OSP-P300MA | ||
［ ］：Represents special specifications
※1: The value in ［ ］ applies when the tool overhang length is 250 mm
※2: Near both ends of the Y-axis travel, the speed will be reduced
※3: The value in ( ) applies to models 30×50, 30×65, 35×50, 35×65
※4: The value in ( ) applies to models 30×80, 30×100, 35×80, 35×100, 35×120
※5: Applies to the version with 6,000 rpm spindle speed
※6: For the high-power version with 4,000 rpm spindle speed
※7: For the high-power version with 6,000 rpm spindle speed
※8: Applies to the standard version
※9: Applies to the version with a lift-type cross rail
※10: For models 30 and 35, the speed is reduced near both ends of the Y-axis travel
※11: With ATC 32 tools, models 25 and above will have a limitation in the ATC operation range
※12: Applies to the 6,000, 8,000, and 10,000 rpm versions
※13: Applies to the 3,600 rpm version
※14: Applies to the 8,000 and 10,000 rpm versions
※15: Applies to model 30×120
※16: Applies to model 35×120
※17: The value in ( ) applies to model 35
※18: Applies to model 35
※20: The value in ( ) applies to models 30×50, 30×65
※21: The value in ( ) applies to models 30×80, 30×100
※22: The value in ( ) applies to models 35×50, 35×65
※23: The value in ( ) applies to models 35×80, 35×100, 35×120
※24: Applies to the 6,000 and 10,000 rpm versions
※25: Applies to the aluminum machining version with 10,000 rpm
※26: Applies to models 25×50, 25×65, 30, and 35
※1: The value in ［ ］ applies when the tool overhang length is 250 mm
※2: Near both ends of the Y-axis travel, the speed will be reduced
※3: The value in ( ) applies to models 30×50, 30×65, 35×50, 35×65
※4: The value in ( ) applies to models 30×80, 30×100, 35×80, 35×100, 35×120
※5: Applies to the version with 6,000 rpm spindle speed
※6: For the high-power version with 4,000 rpm spindle speed
※7: For the high-power version with 6,000 rpm spindle speed
※8: Applies to the standard version
※9: Applies to the version with a lift-type cross rail
※10: For models 30 and 35, the speed is reduced near both ends of the Y-axis travel
※11: With ATC 32 tools, models 25 and above will have a limitation in the ATC operation range
※12: Applies to the 6,000, 8,000, and 10,000 rpm versions
※13: Applies to the 3,600 rpm version
※14: Applies to the 8,000 and 10,000 rpm versions
※15: Applies to model 30×120
※16: Applies to model 35×120
※17: The value in ( ) applies to model 35
※18: Applies to model 35
※20: The value in ( ) applies to models 30×50, 30×65
※21: The value in ( ) applies to models 30×80, 30×100
※22: The value in ( ) applies to models 35×50, 35×65
※23: The value in ( ) applies to models 35×80, 35×100, 35×120
※24: Applies to the 6,000 and 10,000 rpm versions
※25: Applies to the aluminum machining version with 10,000 rpm
※26: Applies to models 25×50, 25×65, 30, and 35
Note: Specifications are subject to change. For details, please contact us via the inquiry page.
