Tiếng Việt
日本語
Machine Tools
Cutting Tools
Clamping Tools
Measuring Equipment
Environmental Equipment
Automation Solutions
| Hạng mục | GL30 | GL60 | GL100 | GL150 | GL200 |
| Clamping method | direct-pressure locking | ||||
| Maximum clamping force (kN) | 294 [392] ※1 | 588 | 980 | 1472 | 1960 |
| Tie bar spacing W×L (mm) | 310 x 310 | 360 x 320 | 460 x 420 | 560 x 520 | 560 x 560 |
| Platen dimensions W×L (mm) | 440 x 440 | 520 x 460 | 640 x 610 | 720 x 680 | 680 x 680 |
| Daylight (minimum mold thickness + maximum mold opening stroke) (mm) | 550 | 650 | 800 | 900 | 950 |
| Minimum/maximum mold thickness (mm) | 150/360 | 200/390 | 250/550 | 250/600 | 300/650 |
| Plasticizing / injection system | screw pre-plunger | ||||
| Screw diameter (mm) | 14 | 18 | 22 | 22 | 25 | 28 | 28 | 32 | 40 | 28 | 32 | 40 | 28 | 32 | 40 |
| Plunger diameter (mm) | 12 | 16 | 22 | 22 | 25 | 28 | 28 | 32 | 40 | 28 | 32 | 40 | 28 | 32 | 40 |
| Maximum injection pressure (MPa) | 288 | 262 | 260 | 260 | 240 | 240 | 220 | 210 | 240 | 220 | 210 | 240 | 220 | 210 |
| Theoretical injection volume (cm³) | 4.5 | 14 | 27 | 27 | 49 | 83 | 83 | 108 | 251 | 83 | 108 | 251 | 83 | 108 | 251 |
| Injection rate (cm³/s) | 57 | 101 | 190 | 190 | 245 | 308 | 308 | 322 | 377 | 308 | 322 | 377 | 308 | 322 | 377 |
| Maximum injection speed (mm/s) | 500 | 500 | 500 | 400 | 300 | 500 | 400 | 300 | 500 | 400 | 300 |
| Plasticizing capacity (kg/h) | 4 | 7 | 14 | 10.5 | 20 | 30 | 30 | 40 | 44 | 30 | 40 | 44 | 30 | 40 | 44 |
| Machine dimensions L×W×H (mm) | 3150 x 1030 x 1679 | 3685 x 1094 x 1679 | 4030 x 1196 x 1792 | 4400 x 1378 x 1878 | 4505 x 1360 x 1990 |
| Machine mass (kg) | 2000 | 2800 | 3300 | 5100 | 5900 |
| Clamping force classification | 20-99 | 20-99 | 100-199 | 100-199 | 200-499 |
| Drive method | Electric hybrid | ||||
※1: A clamping force of 392 kN is available as an option.
Note: Specifications are subject to change. For details, please contact us via the inquiry page.
